• 25+ years of textile experience and excellence
  • We pride ourselves on excellent customer service
  • 5 year guarantee* on most PVC-ST Products
  • Manufactured in the UK to the highest standards

Waterproof Bubble Chair Cover

Code: N/A


This waterproof cover for the Kartell Bubble chair is manufacture by us in the UK using high quality materials and manufacturing methods.  It is ideal for keeping your bubble chair dry, clean and pristine.

  • Manufactured from PVC-ST – this textile is extremely strong, durable and robust
  • 100% waterproof, this long lasting cover offers protection for the heaviest of rain, hail, and snow
  • Excellent UV stability, mildew resistant, and marine grade
  • Easy to clean – the rain will do most of the work for you
  • Comes with our 5 year guarantee*
  • Strong brass eyelets and elasticated shock cord to secure
Length at front104 cm / 40.94 inches
Length at back96.5 cm / 38 inches
Depth77.5 cm / 30.5 inches
Height at Front67cm / 26.38 inches
Height at Back76 cm / 29.92 inches

The Kartell bubble club chair is an elegant, modern, and contemporary chair, often popular for its practical design as well as appealing cosmetics.  We took this into consideration when designing our waterproof chair cover, which is very easy to clean, is tailored for a good fit, and has been designed to last many years even in more extreme weathers.

This chair cover may also be used to fit other similar sized chairs.

IMPORTANT:  It is important to check the measurements against your Kartell chair, as we have found slight differences between some Kartell furniture.  We also have found that manufacturers/website measurements often do not match the actual true furniture- so we advise to please get your tape measure out.

This cover comes with a 5 year guarantee*.

*Our 5 year guarantee is subject to domestic-use only covers, and excludes fair wear and tear, for full details on our guarantee please visit our terms and conditions.

This cover has been specifically designed for the Kartell Bubble chair.  But we note there may be variations – so please do double check that this cover will fit your chair.

When measuring the depth (front-to-back) please do this from in line with the very back to in line with the very front.

The measurements we show are those of the actual cover, therefore you should consider allowing for adequate ‘wiggle’ room to easily get the cover on and off, and there should ideally be a slight gap at the ground.  In most cases a good fit for a cover usually means:

  • The cover should be approx. 1-3cm more in length and depth compared to your furniture
  • The cover should be approx. 1-3cm less in height compared to your furniture (more if you wish for more of a gap).

Note as this furniture has rounded arms, naturally the cover will fall more at the edges.

The shape of the furniture will dictate how a cover sits on the furniture, if you are unsure of size and fit please get in touch with us so we may help advise. 


This textile is truly 100% waterproof this is superior to ‘water-resistant’.  PVC-ST can take an extremely high volume and pressure of water.

It also has excellent UV stability.


This cover features strong brass eyelets frequently spaced around the bottom, with thick robust elasticated shock cord to thread through and secure in place.

Shock cord can be tucked beneath feet/legs on some items of furniture.  It is also very easy to replace or amend.

Are there any care tips?

Always ensure that your furniture and the inside of the cover is clean and dry before putting the cover in place. Air your furniture regularly. When the cover is not in use keep it neatly folded somewhere safe.

How do I clean this cover?

Due to PVC-ST being non-porous, it means heavy rain will wash away most dirt and grime for you! But to clean it properly just give it a wipe with a wet sponge or use a hose pipe on low pressure setting.

How do you secure the cover in place?

We supply a strong elasticated shock cord which you thread through the brass eyelets around the bottom of the cover, pull tight and tie a knot.

What happens if this cover does not fit?

We supply lots of information on the measurements of this cover to try and avoid this situation. But if in the instance it does not fit, please get in touch with us straight away or within 14 days so we may help organise your return/refund or exchange subject to our terms and conditions.

This does not seem to be the right size, do you other versions?

It is best to get in touch with us and we can help guide you correctly, but if your bubble chair seems bigger than our measurements then we would guide you towards getting a custom cover from us- we make this process very quick and easy for you. It is worth noting that we often find that the manufacturers measurements do not match the true measurements of the actual furniture, so please ensure you measure your actual sofa.

Clients & Partners

Trusted by Leading Brands.

We are able to manufacture a custom cover for almost anything and any business, we're proud of our clients and partners