• 25+ years of textile experience and excellence
  • We pride ourselves on excellent customer service
  • 5 year guarantee* on most PVC-ST Products
  • Manufactured in the UK to the highest standards

Waterproof stacking chair cover

Code: N/A


This long lasting waterproof stacking chair cover is ideal for offering superior weather protection all year round.  It is designed to fit most chairs when stacked.

  • Manufactured from high quality PVC-ST textile- superior in performance and quality
  • 100% waterproof, has excellent UV stability, is mildew resistant, and marine-grade
  • Protects against heavy rain, hail, snow, strong winds, dirt, bird droppings, and UV rays
  • Extremely strong, durable and long-lasting
  • Very easy to clean
  • Manufactured in the UK by us, and comes with 5 years guarantee
Length68 cm / 26.77 inches
Width61 cm / 24.02 inches
Height at front68 cm / 26.77 inches
Height Back107 cm / 42.13 inches

Our waterproof stacking chair cover is superior against polyester covers, as PVC-ST is extremely strong, durable, immensely UV stabilised, is 100% waterproof, mildew resistant and very long lasting.  It is superior in both its performance and quality.  It offers excellent protection to many types of stacked chairs.

We manufacture our waterproof stacking chair covers in our UK based workshop, each one is manufactured to high quality and standard.  We see many of these covers far exceeding the 5 year warranty*.

Important care tips: Always make sure that your sofa set and the inside of the cover is dry before use, and air your furniture regularly.

This cover comes with a 5 year guarantee*.

*Our 5 year guarantee is subject to domestic-use only covers, and excludes fair wear and tear, for full details on our guarantee please visit our terms and conditions.

Before measuring ensure to stack all of your chairs tightly, and then measure at the widest parts.

The measurements we show are those of the actual cover, therefore you should consider allowing for adequate ‘wiggle’ room to easily get the cover on and off, and there should ideally be a slight gap at the ground.  In most cases a good fit for a cover usually means:

  • The cover should be approx. 1-3cm more in length and width compared to your item
  • The cover should be approx. 1-3cm less in height compared to your item (more if you wish for more of a gap)

The shape of the item will dictate how a cover sits on the item, if you are unsure of size and fit please get in touch with us so we may help advise. 

If you find this shape will not suit your stacking chairs please do get in touch and we may be able to help supply you with the correct shape. 

This cover features strong brass eyelets frequently spaced around the bottom, with thick robust elasticated shock cord to thread through and secure in place.

Shock cord can be tucked beneath feet/legs on some items of furniture.  It is also very easy to replace or amend.

Are there any care tips?

Always ensure that your furniture and the inside of the cover is clean and dry before putting the cover in place.

Air your sofa set regularly.

When the cover is not in use keep it neatly folded somewhere safe.

Always use the brass eyelets and shock cord to secure the cover in place.

How do I clean/maintain this cover?

Due to PVC-ST being non-porous, it means heavy rain will wash away most dirt and grime for you! But to clean it properly just give it a wipe with a wet sponge or use a hose pipe on low setting.

How thick is the textile?

We use a 580-600gsm PVC-ST which is classed as a heavy duty textile, this is also why it is so long lasting and strong.

What happens if this cover does not fit?

We supply lots of information on the measurements of this cover to try and avoid this situation. But if in the instance it does not fit, please get in touch with us straight away or within 14 days so we may help organise your return/refund or exchange subject to our terms and conditions.

How do you secure the cover in place?

We supply a strong elasticated shock cord which you thread through the brass eyelets around the bottom of the cover, pull tight and tie a knot.

This is not the right size for my stacked chairs do you have other sizes?

We only do a few Kover-it brand standard products (available off-the-shelf) However we could be able to custom manufacture a cover perfect for your stacked chairs and needs! Either use our custom cover enquiry form or get in touch with us via email or 01189 406095.

Clients & Partners

Trusted by Leading Brands.

We are able to manufacture a custom cover for almost anything and any business, we're proud of our clients and partners