This heavy duty round patioset cover is ideal for offering long lasting, high performance outdoor weather protection. Manufactured from PVC-ST, this textile is able to cope in -30/+70°, and has been stress tested to a minimum of 1000000 flexes, making this an extremely durable and robust cover.

This cover features strong brass eyelets around the bottom, and thick elasticated shock cord to thread through and pull tight to secure.

Double stitched seams- with added neat binding over seams which not only looks great, but also adds some protection to seams.

Manufactured by Us – so manufactured from the highest of quality materials and manufacturing methods.

Available in a range of different sizes and colours, it is designed for most popular round dining sets and patio sets including those listed below.

Whether you are looking for a:

4-6 seater round patioset cover

6 seater round patioset cover

6-8 seater round patioset cover

8-10 round dining set cover

Important care tips: Always make sure that your dining set or patio set and the inside of the cover is dry before use, and air your furniture regularly.

This cover comes with a 5 year guarantee*.

*Our 5 year guarantee is subject to domestic-use only covers, and excludes fair wear and tear, for full details on our guarantee please visit our terms and conditions.

Before you measure your patio set or dining set, tuck all chairs evenly beneath your table top. When you check your diameter measurements, double check it in a few places to make sure you have measured at the widest part.

The measurements we show are those of the actual cover, therefore you should consider allowing for adequate ‘wiggle’ room to easily get the cover on and off, and there should ideally be a slight gap at the ground. In most cases a good fit for a cover usually means:

The cover should be approx. 1-3cm more in the diameter compared to your item
The cover should be approx. 1-3cm less in height compared to your item (more if you wish for more of a gap)

Tip: If your patio set is slightly too small – you may be able to pull out your chairs slightly to allow one of our covers to fit.

The shape of the item will dictate how a cover sits on the item, if you are unsure of size and fit please get in touch with us so we may help advise. For some round patio sets and dining sets there may need to be additional shaping, in which case you should consider a custom cover.

This textile is truly 100% waterproof this is superior to ‘water-resistant’. PVC-ST can take an extremely high volume and pressure of water.

It also has excellent UV stability.

features-brass-eyelets-and-shock-cord-green

This cover features strong brass eyelets frequently spaced around the bottom, with thick robust elasticated shock cord to thread through and secure in place.

Shock cord can be tucked beneath feet/legs on some items of furniture. It is also very easy to replace or amend.

Are there any care tips?

Always ensure that your item and the inside of the cover is clean and dry before putting the cover in place.

Air your item regularly.

When the cover is not in use keep it neatly folded somewhere safe.

Always use the brass eyelets and shock cord to secure the cover in place.

How do I clean/maintain this cover?

Due to PVC-ST being non-porous, it means heavy rain will wash away most dirt and grime for you! But to clean it properly just give it a wipe with a wet sponge or use a hose pipe on low pressure setting.

How do I stop water pooling on the cover?

Make sure to use something such as a high large bucket upturned central on your table top before putting the cover on. The prop you use central should be 10-20cm (or more) taller than the chairs, so that it creates a good pitch, allowing water to drain from the cover.

Also make sure to secure the cover in place with the elasticated shock cord supplied

How thick is the textile?

We use a 580-600gsm PVC-ST which is classed as a heavy duty textile, this is also why it is so long lasting and strong.

What happens if this cover does not fit?

We supply lots of information on the measurements of this cover to try and avoid this situation. But if in the instance it does not fit, please get in touch with us straight away or within 14 days so we may help organise your return/refund or exchange subject to our terms and conditions.

How do you secure the cover in place?

We supply a strong elasticated shock cord which you thread through the brass eyelets around the bottom of the cover, pull tight and tie a knot.

Will this cover stretch at all?

No, the textile is strong and durable and will not stretch or change in it's size.

This is not the right size for my dining set do you have other sizes?

Not as standard, However you may want to check if one of our round table covers may suit. Or we may be able to help assist you with a custom cover tailored to your dining set, please do get in touch with us on 01189 406095 so we may help assist you.